42 % tpc series low esr tacmicrochip the world s smallest surface mount tantalum capacitor, small enough to create space providing room for ideas to grow. tacmicrochip is a major breakthrough in miniaturization without reduction in performance. it offers you the highest energy store in an 0603 or 0805 case size; enhanced high frequency operation through unique esr performance with temperature and voltage stability. case dimensions: millimeters (inches) termination minimum average code eia eia length (l) width (w) height (h) spacing(s) termination mass code metric length (lt) l 0603 1608-10 1.60 0.85 0.85 0.55 min 0.15 (0.006) 8.6mg (0.063 ) (0.033 ) (0.033 ) r 0805 2012-15 2.00 1.35 1.35 0.70 min 0.15 (0.006) 29.9mg (0.079 ) (0.053 ) (0.053 ) l slt w h polarity band not to exceed center line +0.20 -0.00 +0.008 -0.000 +0.20 -0.00 +0.008 -0.000 +0.15 -0.00 +0.006 -0.000 +0.15 -0.00 +0.006 -0.000 +0.15 -0.00 +0.006 -0.000 +0.15 -0.00 +0.006 -0.000 tpc type tacmicrochip r case size 0603=l 0805=r 106 capacitance code pf code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) m tolerance k=?0% m=?0% 010 rated dc voltage 002=2vdc 003=3vdc 004=4vdc 006=6.3vdc 010=10vdc 016=16vdc 020=20vdc 025=25vdc 1800 maximum esr in milliohms see note below how to order r packaging (see table below) standard reel tin termination gold termination size plastic tape plastic tape case r/l r/l 7" rxxxx axxxx 4 1 4 " xxxxx fxxxx packaging suffix technical data: all technical data relate to an ambient temperature of +25? capacitance range: 1 ? to 47 ? capacitance tolerance: ?0%; ?0% leakage current dcl: 0.01cv or 0.5? whichever is the greater rated voltage (v r ) +85?: 3 4 6.3 10 16 20 25 category voltage (v c ) +125?: 2 2.7 4 7 10 13 17 surge voltage (v s ) +85?: 3.9 5.2 8 13 20 26 32 surge voltage (v s ) +125?: 2.6 3.2 5 8 12 16 20 temperature range: -55? to +125? reliability: 1% per 1000 hours at 85?, v with 0.1 ? /v series impedance, 60% confidence level termination finish: nickel and tin plating (standard), nickel and gold plating option available upon request technical specifications environmental friendly component note: the eia & cecc standards for low esr solid tantalum capacitors allow an esr movement to 1.25 times catalog limit post mounting. note: xxxx = esr value in milliohms
43 capacitance voltage rating dc (v r ) at 85? ? code 2.0v 3.0v 4.0v 6.3v 10v 16v 20v 25v 0.33 334 0.47 474 0.68 684 1.0 105 r(3000) 1.5 155 2.2 225 3.3 335 l(5000) 4.7 475 l(5000) 6.8 685 10 106 l(4000) l(4000),r(1800) r(1800) 15 156 r(1800) r(1500) 22 226 r(1800) r(1500) 33 336 r(1800) r(1500) 47 476 r(1500) 68 686 100 107 150 157 220 227 tpc series low esr tacmicrochip low esr range (letter denotes case size) (esr in m ? ) rated dcl df esr 100khz ripple current ratings (a) 100khz ripple voltage ratings (v) avx eia case capacitance voltage (?) % max. (m ? ) part no. size (?) (v) max. max. @100khz 25? 85? 125? 25? 85? 125? tpcr336*003# 0805 r 33 3.0 1.0 10 1800 0.158 0.142 0.063 0.285 0.256 0.114 tpcr476*003# 0805 r 47 3.0 1.5 10 1500 0.173 0.156 0.069 0.260 0.234 0.104 tpcr226*004# 0805 r 22 4.0 0.9 8 1800 0.158 0.142 0.063 0.285 0.256 0.114 tpcr336*004# 0805 r 33 4.0 1.3 10 1500 0.173 0.156 0.069 0.260 0.234 0.104 tpcl106m006# 0603 l 10 6.3 0.6 10 4000 0.079 0.071 0.032 0.316 0.285 0.126 tpcr156*006# 0805 r 15 6.3 0.9 8 1800 0.158 0.142 0.063 0.285 0.256 0.114 tpcr226*006# 0805 r 22 6.3 1.4 10 1500 0.173 0.156 0.069 0.260 0.234 0.104 tpcl335*010# 0603 l 3.3 10.0 0.5 8 5000 0.071 0.064 0.028 0.354 0.318 0.141 tpcl475m010# 0603 l 4.7 10.0 0.5 10 5000 0.071 0.064 0.028 0.354 0.318 0.141 tpcl106m010# 0603 l 10 10.0 1.0 20 4000 0.079 0.071 0.032 0.316 0.285 0.126 tpcr106*010# 0805 r 10 10.0 1.0 8 1800 0.158 0.142 0.063 0.285 0.256 0.114 tpcr156*010# 0805 r 15 10.0 1.5 10 1500 0.173 0.156 0.069 0.260 0.234 0.104 tpcr106*016# 0805 r 10 16.0 1.6 10 1800 0.158 0.142 0.063 0.285 0.256 0.114 tpcr105*025# 0805 r 1.0 25.0 0.5 8 3000 0.122 0.110 0.049 0.367 0.331 0.147 ratings & part number reference all technical data relates to an ambient temperature of +25?. capacitance and df are measured at 120hz, 0.5v rms with a maximum dc bias of 2.2 volts. dcl is measured at rated voltage after 5 minutes. * insert k for ?0% and m for ?0% capacitance tolerance note: avx reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. the eia & cecc standards for low esr solid tantalum capacitors allow an esr movement to 1.25 times catalog limit post mounting.
|
